Munnstykke Tuba Denis Wick Ultra AT3U, Forsølvet (BU)

Mouthpiece Tuba Denis Wick Ultra AT3U Silver (Special Order)
Produsent: Denis Wick
Tilgjengelighet: På lager
Varenummer: DW5386-AT3U
2 530 kr
decrease increase

BU betyr Bestillingsutvalg. Lenger leveringstid må påregnes


Aaron Tindall Ultra Tuba Mouthpiece Silver Plated


Description
The shank of this mouthpiece has been very carefully engineered to fit all tubas with the standard Euroshank-type fitting (marked U) and the standard American shank fitting (marked Y).


Original lead-pipes from Meinl-Weston, B & S, Yamaha, Eastman, and Miraphone were used in this process. The exact matching of mouthpiece and instrument receiver and leadpipe is vital to achieve the correct response from modern tubas.


We recommend:


ATU- European shank
Meinl Weston Tubas
Alexander Tubas
Hirsbrunner Tubas
Eastman York 836 Tuba (if desired)
Miraphone 1293 CC tuba fitted with the Euro shank receiver


ATUY- American Shank
For most all F tubas
B&S Tubas (CC and F)
Yamaha Tubas
Miraphone Tubas
Eastman Tubas (632, 832, 836 CC and F tuba models too)
Besson Eb Tubas


Aaron Tindall said


I feel that upon trying these new models, the performer will immediately notice an increased sense of improved articulation, intonation, greater endurance, and significantly enhanced power in both the high and low registers.
Along with these comes an ease of playing accompanied by a richer, broader, truer sound that we believe is currently unmatched by many of the other competitors in todays market.


AT1U / AT1UY  (Cup Diameter 32.8mm  /  Bore 9.53mm)


This new mouthpiece designed by Aaron Tindall is the largest of the range, and is designed for use in big CC or Bbb tubas. It has straight walls after the rim leading to a very wide funnel-shaped cup with a large throat.
The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece is for strong players and produces a massive deep sound.


AT2U / AT2UY  (Cup Diameter 32.8mm  /  Bore 9.53mm)


This new mouthpiece designed by Aaron Tindall is the most popular of the range, and is designed for use in 5/4 CC tubas.
It has a large cup which is a mixture of a funnel and a bowl with a large throat, and is slightly shallower than the AT1U.
This mouthpiece has already proved a big hit with many leading American players. The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece produces a rich and vibrant sound with plenty of focus.
There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT3U / AT3UY   (Cup Diameter 32.8mm  /  Bore 8.20mm)


This new mouthpiece designed by Aaron Tindall is designed for use in all CC tubas.
It has a deep Helleberg-style design with slightly straighter sides than the AT2U blending into a concave cup.
The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece produces a rich and even tone across all registers.


AT4U / AT4UY  (Cup Diameter 32.8mm  /  Bore 8.30mm)


This new mouthpiece designed by Aaron Tindall is designed for use in rotary valve CC tubas.
It has a bowl-shaped Fred Geib-style cup. Fred Geib (1871-1950) played tuba in the New York Philharmonic for, amongst others, Gustav Mahler and Richard Strauss.
He designed mouthpieces for Gratz and C.G.Conn. His bowl-shaped mouthpiece design brings out the best in rotary valve tubas, giving a great core to the sound.
The throat is medium-sized, which helps accurate pitching. The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece produces a rich and even tone across all registers.


AT5U / AT5UY  (Cup Diameter 32.8mm  /  Bore 8.90mm)


This new mouthpiece designed by Aaron Tindall is similar to the AT2U, but with a smaller throat and slightly tighter backbore.
It is designed for orchestral F tubas, and has a large cup which is a mixture of a funnel and a bowl with a quite large throat.
This is an ideal mouthpiece for an orchestral player using the F tuba. It produces a rich, vibrant sound with plenty of focus.
The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus. There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT6U / AT6UY   (Cup Diameter 32.8mm  /  Bore 8.40mm)


This new mouthpiece designed by Aaron Tindall is for F tubas.
It has a slightly shallower cup than the AT5U and is more bowl-shaped, giving a powerful, well-centred sound which would be ideal in both orchestral and chamber music playing.
The rim is designed by Warren Deck and is one of the most comfortable on the market. It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus. There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT7U/AT7UY  (Cup Diameter 32.8mm  /  Bore 8.00mm)


This new mouthpiece from Aaron Tindall is designed as a soloists mouthpiece for F tuba.
It has a centred quality with excellent projection, making it ideal for solo and quintet playing.
The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus.
There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT8U / AT8UY  (Cup Diameter 32.8mm  /  Bore 7.90mm)


This new mouthpiece from Aaron Tindall is designed as a super-soloists mouthpiece for F tuba.
It has a brilliant quality with an excellent high register, making it ideal for the rigorous demands of modern solo tuba repertoire.
The cup has been designed to give great consistency of tone and a responsive low register, whilst producing a beautiful, singing tone in the high notes.
The throat is larger than on some soloist models, allowing the player to produce a full sound across the range.
The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece produces a rich and vibrant sound with plenty of focus.
There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT0U / AT0UY (Cup diameter is 32.8mm  /  Bore is 9.55mm)


This mouthpiece was designed to produce an enormous volume of sound for the ensemble player.
Perfect for those looking to make their 4/4, 5/4, or 6/4 CC tuba sound larger than it is, and for Bb players to maximize the depth and volume of their instrument.


Much like the AT1, the new AT0 is a slightly larger version boasting a deep funnel and bowl mixture into the walls of the cup.
It has a large bore like the AT1 and AT2 models at 9.52mm (.375) There is a little more interior rim diameter, but still designed by Warren Deck one of the most comfortable rims ever made, featuring just the right amount of width and bite to give the player a sense of comfort and stability.



BU betyr Bestillingsutvalg. Lenger leveringstid må påregnes


Aaron Tindall Ultra Tuba Mouthpiece Silver Plated


Description
The shank of this mouthpiece has been very carefully engineered to fit all tubas with the standard Euroshank-type fitting (marked U) and the standard American shank fitting (marked Y).


Original lead-pipes from Meinl-Weston, B & S, Yamaha, Eastman, and Miraphone were used in this process. The exact matching of mouthpiece and instrument receiver and leadpipe is vital to achieve the correct response from modern tubas.


We recommend:


ATU- European shank
Meinl Weston Tubas
Alexander Tubas
Hirsbrunner Tubas
Eastman York 836 Tuba (if desired)
Miraphone 1293 CC tuba fitted with the Euro shank receiver


ATUY- American Shank
For most all F tubas
B&S Tubas (CC and F)
Yamaha Tubas
Miraphone Tubas
Eastman Tubas (632, 832, 836 CC and F tuba models too)
Besson Eb Tubas


Aaron Tindall said


I feel that upon trying these new models, the performer will immediately notice an increased sense of improved articulation, intonation, greater endurance, and significantly enhanced power in both the high and low registers.
Along with these comes an ease of playing accompanied by a richer, broader, truer sound that we believe is currently unmatched by many of the other competitors in todays market.


AT1U / AT1UY  (Cup Diameter 32.8mm  /  Bore 9.53mm)


This new mouthpiece designed by Aaron Tindall is the largest of the range, and is designed for use in big CC or Bbb tubas. It has straight walls after the rim leading to a very wide funnel-shaped cup with a large throat.
The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece is for strong players and produces a massive deep sound.


AT2U / AT2UY  (Cup Diameter 32.8mm  /  Bore 9.53mm)


This new mouthpiece designed by Aaron Tindall is the most popular of the range, and is designed for use in 5/4 CC tubas.
It has a large cup which is a mixture of a funnel and a bowl with a large throat, and is slightly shallower than the AT1U.
This mouthpiece has already proved a big hit with many leading American players. The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece produces a rich and vibrant sound with plenty of focus.
There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT3U / AT3UY   (Cup Diameter 32.8mm  /  Bore 8.20mm)


This new mouthpiece designed by Aaron Tindall is designed for use in all CC tubas.
It has a deep Helleberg-style design with slightly straighter sides than the AT2U blending into a concave cup.
The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece produces a rich and even tone across all registers.


AT4U / AT4UY  (Cup Diameter 32.8mm  /  Bore 8.30mm)


This new mouthpiece designed by Aaron Tindall is designed for use in rotary valve CC tubas.
It has a bowl-shaped Fred Geib-style cup. Fred Geib (1871-1950) played tuba in the New York Philharmonic for, amongst others, Gustav Mahler and Richard Strauss.
He designed mouthpieces for Gratz and C.G.Conn. His bowl-shaped mouthpiece design brings out the best in rotary valve tubas, giving a great core to the sound.
The throat is medium-sized, which helps accurate pitching. The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece produces a rich and even tone across all registers.


AT5U / AT5UY  (Cup Diameter 32.8mm  /  Bore 8.90mm)


This new mouthpiece designed by Aaron Tindall is similar to the AT2U, but with a smaller throat and slightly tighter backbore.
It is designed for orchestral F tubas, and has a large cup which is a mixture of a funnel and a bowl with a quite large throat.
This is an ideal mouthpiece for an orchestral player using the F tuba. It produces a rich, vibrant sound with plenty of focus.
The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus. There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT6U / AT6UY   (Cup Diameter 32.8mm  /  Bore 8.40mm)


This new mouthpiece designed by Aaron Tindall is for F tubas.
It has a slightly shallower cup than the AT5U and is more bowl-shaped, giving a powerful, well-centred sound which would be ideal in both orchestral and chamber music playing.
The rim is designed by Warren Deck and is one of the most comfortable on the market. It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus. There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT7U/AT7UY  (Cup Diameter 32.8mm  /  Bore 8.00mm)


This new mouthpiece from Aaron Tindall is designed as a soloists mouthpiece for F tuba.
It has a centred quality with excellent projection, making it ideal for solo and quintet playing.
The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus.
There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT8U / AT8UY  (Cup Diameter 32.8mm  /  Bore 7.90mm)


This new mouthpiece from Aaron Tindall is designed as a super-soloists mouthpiece for F tuba.
It has a brilliant quality with an excellent high register, making it ideal for the rigorous demands of modern solo tuba repertoire.
The cup has been designed to give great consistency of tone and a responsive low register, whilst producing a beautiful, singing tone in the high notes.
The throat is larger than on some soloist models, allowing the player to produce a full sound across the range.
The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece produces a rich and vibrant sound with plenty of focus.
There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT0U / AT0UY (Cup diameter is 32.8mm  /  Bore is 9.55mm)


This mouthpiece was designed to produce an enormous volume of sound for the ensemble player.
Perfect for those looking to make their 4/4, 5/4, or 6/4 CC tuba sound larger than it is, and for Bb players to maximize the depth and volume of their instrument.


Much like the AT1, the new AT0 is a slightly larger version boasting a deep funnel and bowl mixture into the walls of the cup.
It has a large bore like the AT1 and AT2 models at 9.52mm (.375) There is a little more interior rim diameter, but still designed by Warren Deck one of the most comfortable rims ever made, featuring just the right amount of width and bite to give the player a sense of comfort and stability.



Vis mer
Produktspesifikasjoner
Fabrikat-ForlagDenis Wick
ProduktTuba
SerieUltra
FinishForsølvet
FargeSølv
MaterialeMessing
ArtistAaron Tindall
ArtistAaron Tindall

Relaterte produkter

Varen er på lager

Blyantholder stropp Leuchtturm 1917

Pen and pencil loop made of a strong black elastic strap. For thin pencils or thick fountain pens. The pen and pencil loop is self-adhesive and can, if desired, be stuck to the inside back cover of the notebook.Size: 40x40 mm, 15 mm elastic loop.
50 kr
Varen er på lager

Slagverk Sonor 150th Anniversary Signature Shells Set, Bubinga/Beech w/Gold Hardware

Slagverk Sonor 150th Anniversary Signature Shells Set, Bubinga/Beech w/Gold HardwareFusing Legacy and modern TechnologyThe original SONOR Signature Series was introduced at the Frankfurt Musikmesse in 1980. It was the result of extensive scientific research commissioned by SONOR in the pursuit of building the most sonically and technically advanced high-end drum set of its time. The extremely deep and heavy 10.5mm beechwood shells were designed for the most unobstructed drum head vibration, resulting in the purest tone with the most resonance and projection. To say that the Signature Series raised the bar for high-end drums would be an understatement. It defined what high-end drums were supposed to be from that point on.The 150th Anniversary Signature Series Shell Sets are more than just a reissue of the original from the 1980s. They are a tribute which merges tradition and innovation by combining a replica of theSignature Series shell with contemporary state-of-the-art shell hardware features.To faithfully recreate the iconic Signature Series shell, 13 plies of selected German beech veneer are cross-laminated. As with the original, genuine Bubinga is used for the outer and inner ply of the shell. The stunning grain structure, various color shades and dark streaks of the Bubinga Pommelé (Guibourtia demeusii) used for this instrument add even more visual dimension. To emphasize the naturally grown beauty of the Bubinga veneer, the shells are finished with clear high gloss lacquer, which is applied in multiple lacquering and polishing stages by hand. All hardware on the drums is plated with 24-carat gold to offset the dark and saturated brown color of the veneer as well as create the ultimate luxurious experience. Finally, all drums receive individually numbered commemorative badges to certify the uniqueness of each 150th Anniversary Signature Series Shell Set.The 150th Anniversary Signature Series Shell Set is strictly limited to 75 pieces worldwide. 25 of which are made in the Heritage outfit featuring authentic Signature Series shell depths, whereas the remaining 50 use shallower, more contemporary depths. SONOR SIGNATURE Shell Set: - SKU: 11004321 - 22"x16" Bass Drum with Mount - 10"x07" Tom w/T.A.R Mounting System with AcousticGate to finetune the drums sustain- 12"x08" Tom w/T.A.R Mounting System with AcousticGate to finetune the drums sustain- 14"x13" Floor Tom - 16"x15" Floor Tom - 14"x8" Snare Drum - DTH 675 MC G Double Tom Holder - Limited to 50 pieces worldwide
185765 kr 166670 kr
Varen er på lager

Midt i Blinken 1 Klarinett

Midt i Blinken 1 Klarinett m/cdHovedidéen bak denne boka er å lage en samling melodier som elevene blir glade i og spiller ofte. Vi tror den gode melodi gir inspirasjon og motiverer. Med lærerens veiledning og erfaring vil eleven gjennom denne boka utvikle seg både på instrumentet og rent menneskelig i samvær og samspill med andre. Besifring, kanons og duetter inviterer til samspill.Ikke glem leken; syng, dans, spill utenat, fargelegg, lag tekster og la elevene lære at musikk først og fremst er fint og godt, og ikke feil toner. Framhev det som er bra og la det være drivkraften.CD-en inneholder demoutgave og komp til 20 av sangene.
269 kr
Varen er på lager

Notestativ K&M 10100-013-55, Sort

101 - Music standProduct variant: 10100-013-55 - blackDataHeight from 650 to 1,225 mmLeg construction brace construction, folds compactlyMaterial steelMusic desk traditionally foldableMusic desk dimensio4n4s0 x 215 mmProduct Category BaselineRod combination 3-piece folding designSize when folded 390 mmSpecial features the K&M ClassicType blackWeight 1.04 kgOur classic music stand has been redesigned. To provide new user friendly and comfortable height adjustment, the 101 was supplemented with clamp elements which protect the finish.The powder coating is extremely resistant to wear and tear and guarantees optimal protection against corrosion. With the optional carrying case, the collapsible music stand is always stored way and can be easily transported to any destination.
415 kr
Varen er på lager

Peer Gynt Suite 1, Op. 46, Edvard Grieg. Piano

Peer Gynt Suite 1 - Opus 46Morgenstemning / Morning Mood Åses død / The Death of ÅseAnitras dans / Anitra's DanceI Dovregubbens Hall / In the Hall of the Mountain King
125 kr
Varen er på lager

Trommestikker Freer Percussion SINF, Light Orchestral Hornwood

Trommestikker Freer Percussion SINF, Light Orchestral HornwoodFREER LIGHT ORCHESTRAL HORNWOOD SIGNATURE MODEL SINFHornwood Models, Snare Drum SticksDESCRIPTION Freer Light Orchestral Hornwood Signature Model The Hornwood light orchestral retains its shape from the tip back however I have deliberately chosen to eliminate the taper in the back. This increases the back weight feel of the stick just enough to help it rebound quicker which you can really feel in playing doubles such as 4 stroke ruffs in Lt. Kije and 7s in Scheherezade. By making this model out of Hornwood Im also able to increase the weight of the stick without increasing size and bulk. Our Hornwood is very dense and hard and adds a couple grams of weight as well. The feel is something like rosewood or ebony but without the excessive vibration and low pitch that come with those woods. It is also extremely durable and will likely last you a lifetime if cared for properly. I feel this is the absolute best version of this stick I have come up with to date. Really a perfect stick for ANY soft playing that requires clarity.
675 kr
Varen er på lager

Vi Spiller Piano 1, Carl Bertil Agnestig

Vi Spiller Piano 1, Carl Bertil Agnestig 
199 kr
Varen er på lager

Digitalsett Roland TD-07DMK, Komplett m/Padder, Modul og Rackstativ

Digitalsett Roland TD-07DMK, Komplett m/Padder, Modul og RackstativKit configuration :Kick: KD-2, Snare: PDX-8, Hi-hat: CY-5, Hi-hat control pedal: Half-open stroke detectable, Tom: PDX-6A x 3, *2 Crash: CY-5, Ride: CY-5, Drum stand: Four-post type rack standDrum kits: 50 (25 Preset -User 25)Instruments:143Effect Types: Pad Equalizer: each pad, Overhead Mic Simulator,Room, Multi-Effects: 1 system, 30 typeCoach functions: (5 modes): Time check (easy) Time check (hard) Quiet count Auto up/down,Change-upMetronome: Tempo (20--260) Rhythm type (5 types) Sounds (15 types)Bluetooth : Supported standards: Bluetooth Ver 4.2 Supported profile: A2DP (Audio), GATT (MIDI over Bluetooth Low Energy) Codec: SBC (Support to the content protection of the SCMS-T method)Display:16 characters x 2 lines LCD (with backlightConnectors: OUTPUT/PHONES jack: Stereo miniature phone type MIX IN jack: Stereo miniature phone type USB COMPUTER port: USB B type TRIGGER INPUT connector: DB-25 type  (Kick, Snare, Tom 1, Tom 2, Tom 3, Hi-hat, Crash 1, Crash 2, Ride, Hi-hat control )USB COMPUTER: Speed: Hi-speed USB Driver mode: Generic, Vender Protocol: USB MIDI, USB Audio 3USB Audio: Sampling Rate (original): 44.1 kHz Sampling Rate (with sampling rate converter): 96 kHz, 48 kHz Record: 2 channels Playback: 2 channels Power Supply :AC adaptor (DC 12 V)Current draw: 250mAWEIGHT :18.0 kg / 39 lbs 11 oz*Stortrommepedal kommer i tillegg.  
10425 kr 9383 kr
Filters
Sort
display