Munnstykke Tuba Denis Wick Ultra AT5U, Forgyllet (BU)

Mouthpiece Tuba Denis Wick Ultra AT5U Gold Plated (Special Order)
Produsent: Denis Wick
Tilgjengelighet: Bestillingsvare
Varenummer: DW4386-AT5U
4 985 kr
4 736 kr
decrease increase

BU betyr Bestillingsutvalg. Lenger leveringstid må påregnes


Aaron Tindall Ultra Tuba Mouthpiece  Gold Plated


SPECIAL ORDER
This mouthpiece was designed to produce an enormous volume of sound for the ensemble player.
Perfect for those looking to make their 4/4, 5/4, or 6/4 CC tuba sound larger than it is, and for Bb players to maximize the depth and volume of their instrument.
The shank of this mouthpiece has been very carefully engineered to fit all tubas with the standard Euroshank-type fitting (marked U) and the standard American shank fitting (marked Y).
Original lead-pipes from Meinl-Weston, B & S, Yamaha, Eastman, and Miraphone were used in this process. The exact matching of mouthpiece and instrument receiver and leadpipe is vital to achieve the correct response from modern tubas.


We recommend:


ATU- European shank
Meinl Weston Tubas
Alexander Tubas
Hirsbrunner Tubas
Eastman York 836 Tuba (if desired)
Miraphone 1293 CC tuba fitted with the Euro shank receiver


ATUY- American Shank
For most all F tubas
B&S Tubas (CC and F)
Yamaha Tubas
Miraphone Tubas
Eastman Tubas (632, 832, 836 CC and F tuba models too)
Besson Eb Tubas


Aaron Tindall said:


I feel that upon trying these new models, the performer will immediately notice an increased sense of improved articulation, intonation, greater endurance, and significantly enhanced power in both the high and low registers.
Along with these comes an ease of playing accompanied by a richer, broader, truer sound that we believe is currently unmatched by many of the other competitors in todays market.


AT1U / AT1UY  (Cup Diameter 32.8mm  /  Bore 9.53mm)
This new mouthpiece designed by Aaron Tindall is the largest of the range, and is designed for use in big CC or Bbb tubas.
It has straight walls after the rim leading to a very wide funnel-shaped cup with a large throat. The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece is for strong players and produces a massive deep sound.


AT2U / AT2UY  (Cup Diameter 32.8mm  /  Bore 9.53mm)
This new mouthpiece designed by Aaron Tindall is the most popular of the range, and is designed for use in 5/4 CC tubas.
It has a large cup which is a mixture of a funnel and a bowl with a large throat, and is slightly shallower than the AT1U.
This mouthpiece has already proved a big hit with many leading American players. The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece produces a rich and vibrant sound with plenty of focus.
There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.
 
AT3U / AT3UY   (Cup Diameter 32.8mm  /  Bore 8.20mm)
This new mouthpiece designed by Aaron Tindall is designed for use in all CC tubas.
It has a deep Helleberg-style design with slightly straighter sides than the AT2U blending into a concave cup.
The rim is designed by Warren Deck and is one of the most comfortable on the market. It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and even tone across all registers.


AT4U / AT4UY  (Cup Diameter 32.8mm  /  Bore 8.30mm)
This new mouthpiece designed by Aaron Tindall is designed for use in rotary valve CC tubas.
It has a bowl-shaped Fred Geib-style cup. Fred Geib (1871-1950) played tuba in the New York Philharmonic for, amongst others, Gustav Mahler and Richard Strauss.
He designed mouthpieces for Gratz and C.G.Conn. His bowl-shaped mouthpiece design brings out the best in rotary valve tubas, giving a great core to the sound.
The throat is medium-sized, which helps accurate pitching. The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece produces a rich and even tone across all registers.


AT5U / AT5UY  (Cup Diameter 32.8mm  /  Bore 8.90mm)
This new mouthpiece designed by Aaron Tindall is similar to the AT2U, but with a smaller throat and slightly tighter backbore.
It is designed for orchestral F tubas, and has a large cup which is a mixture of a funnel and a bowl with a quite large throat.
This is an ideal mouthpiece for an orchestral player using the F tuba. It produces a rich, vibrant sound with plenty of focus.
The rim is designed by Warren Deck and is one of the most comfortable on the market. It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus. There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT6U / AT6UY   (Cup Diameter 32.8mm  /  Bore 8.40mm)
This new mouthpiece designed by Aaron Tindall is for F tubas.
It has a slightly shallower cup than the AT5U and is more bowl-shaped, giving a powerful, well-centred sound which would be ideal in both orchestral and chamber music playing.
The rim is designed by Warren Deck and is one of the most comfortable on the market. It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus. There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT7U/AT7UY  (Cup Diameter 32.8mm  /  Bore 8.00mm)
This new mouthpiece from Aaron Tindall is designed as a soloists mouthpiece for F tuba.
It has a centred quality with excellent projection, making it ideal for solo and quintet playing.
The rim is designed by Warren Deck and is one of the most comfortable on the market. It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus. There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT8U / AT8UY  (Cup Diameter 32.8mm  /  Bore 7.90mm)
This new mouthpiece from Aaron Tindall is designed as a super-soloists mouthpiece for F tuba.
It has a brilliant quality with an excellent high register, making it ideal for the rigorous demands of modern solo tuba repertoire.
The cup has been designed to give great consistency of tone and a responsive low register, whilst producing a beautiful, singing tone in the high notes.
The throat is larger than on some soloist models, allowing the player to produce a full sound across the range.
The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus.
There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT0U / AT0UY (Cup diameter is 32.8mm  /  Bore is 9.55mm)
This mouthpiece was designed to produce an enormous volume of sound for the ensemble player.
Perfect for those looking to make their 4/4, 5/4, or 6/4 CC tuba sound larger than it is, and for Bb players to maximize the depth and volume of their instrument.
Much like the AT1, the new AT0 is a slightly larger version boasting a deep funnel and bowl mixture into the walls of the cup.
It has a large bore like the AT1 and AT2 models at 9.52mm (.375) There is a little more interior rim diameter, but still designed by Warren Deck one of the most comfortable rims ever made, featuring just the right amount of width and bite to give the player a sense of comfort and stability.



BU betyr Bestillingsutvalg. Lenger leveringstid må påregnes


Aaron Tindall Ultra Tuba Mouthpiece  Gold Plated


SPECIAL ORDER
This mouthpiece was designed to produce an enormous volume of sound for the ensemble player.
Perfect for those looking to make their 4/4, 5/4, or 6/4 CC tuba sound larger than it is, and for Bb players to maximize the depth and volume of their instrument.
The shank of this mouthpiece has been very carefully engineered to fit all tubas with the standard Euroshank-type fitting (marked U) and the standard American shank fitting (marked Y).
Original lead-pipes from Meinl-Weston, B & S, Yamaha, Eastman, and Miraphone were used in this process. The exact matching of mouthpiece and instrument receiver and leadpipe is vital to achieve the correct response from modern tubas.


We recommend:


ATU- European shank
Meinl Weston Tubas
Alexander Tubas
Hirsbrunner Tubas
Eastman York 836 Tuba (if desired)
Miraphone 1293 CC tuba fitted with the Euro shank receiver


ATUY- American Shank
For most all F tubas
B&S Tubas (CC and F)
Yamaha Tubas
Miraphone Tubas
Eastman Tubas (632, 832, 836 CC and F tuba models too)
Besson Eb Tubas


Aaron Tindall said:


I feel that upon trying these new models, the performer will immediately notice an increased sense of improved articulation, intonation, greater endurance, and significantly enhanced power in both the high and low registers.
Along with these comes an ease of playing accompanied by a richer, broader, truer sound that we believe is currently unmatched by many of the other competitors in todays market.


AT1U / AT1UY  (Cup Diameter 32.8mm  /  Bore 9.53mm)
This new mouthpiece designed by Aaron Tindall is the largest of the range, and is designed for use in big CC or Bbb tubas.
It has straight walls after the rim leading to a very wide funnel-shaped cup with a large throat. The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece is for strong players and produces a massive deep sound.


AT2U / AT2UY  (Cup Diameter 32.8mm  /  Bore 9.53mm)
This new mouthpiece designed by Aaron Tindall is the most popular of the range, and is designed for use in 5/4 CC tubas.
It has a large cup which is a mixture of a funnel and a bowl with a large throat, and is slightly shallower than the AT1U.
This mouthpiece has already proved a big hit with many leading American players. The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece produces a rich and vibrant sound with plenty of focus.
There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.
 
AT3U / AT3UY   (Cup Diameter 32.8mm  /  Bore 8.20mm)
This new mouthpiece designed by Aaron Tindall is designed for use in all CC tubas.
It has a deep Helleberg-style design with slightly straighter sides than the AT2U blending into a concave cup.
The rim is designed by Warren Deck and is one of the most comfortable on the market. It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and even tone across all registers.


AT4U / AT4UY  (Cup Diameter 32.8mm  /  Bore 8.30mm)
This new mouthpiece designed by Aaron Tindall is designed for use in rotary valve CC tubas.
It has a bowl-shaped Fred Geib-style cup. Fred Geib (1871-1950) played tuba in the New York Philharmonic for, amongst others, Gustav Mahler and Richard Strauss.
He designed mouthpieces for Gratz and C.G.Conn. His bowl-shaped mouthpiece design brings out the best in rotary valve tubas, giving a great core to the sound.
The throat is medium-sized, which helps accurate pitching. The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability. This mouthpiece produces a rich and even tone across all registers.


AT5U / AT5UY  (Cup Diameter 32.8mm  /  Bore 8.90mm)
This new mouthpiece designed by Aaron Tindall is similar to the AT2U, but with a smaller throat and slightly tighter backbore.
It is designed for orchestral F tubas, and has a large cup which is a mixture of a funnel and a bowl with a quite large throat.
This is an ideal mouthpiece for an orchestral player using the F tuba. It produces a rich, vibrant sound with plenty of focus.
The rim is designed by Warren Deck and is one of the most comfortable on the market. It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus. There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT6U / AT6UY   (Cup Diameter 32.8mm  /  Bore 8.40mm)
This new mouthpiece designed by Aaron Tindall is for F tubas.
It has a slightly shallower cup than the AT5U and is more bowl-shaped, giving a powerful, well-centred sound which would be ideal in both orchestral and chamber music playing.
The rim is designed by Warren Deck and is one of the most comfortable on the market. It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus. There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT7U/AT7UY  (Cup Diameter 32.8mm  /  Bore 8.00mm)
This new mouthpiece from Aaron Tindall is designed as a soloists mouthpiece for F tuba.
It has a centred quality with excellent projection, making it ideal for solo and quintet playing.
The rim is designed by Warren Deck and is one of the most comfortable on the market. It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus. There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT8U / AT8UY  (Cup Diameter 32.8mm  /  Bore 7.90mm)
This new mouthpiece from Aaron Tindall is designed as a super-soloists mouthpiece for F tuba.
It has a brilliant quality with an excellent high register, making it ideal for the rigorous demands of modern solo tuba repertoire.
The cup has been designed to give great consistency of tone and a responsive low register, whilst producing a beautiful, singing tone in the high notes.
The throat is larger than on some soloist models, allowing the player to produce a full sound across the range.
The rim is designed by Warren Deck and is one of the most comfortable on the market.
It features just the right amount of width and bite to give the player a sense of comfort and stability.
This mouthpiece produces a rich and vibrant sound with plenty of focus.
There is a distinct shelf at the bottom of the cup which helps achieve a concentrated power that gives a sound that really projects.


AT0U / AT0UY (Cup diameter is 32.8mm  /  Bore is 9.55mm)
This mouthpiece was designed to produce an enormous volume of sound for the ensemble player.
Perfect for those looking to make their 4/4, 5/4, or 6/4 CC tuba sound larger than it is, and for Bb players to maximize the depth and volume of their instrument.
Much like the AT1, the new AT0 is a slightly larger version boasting a deep funnel and bowl mixture into the walls of the cup.
It has a large bore like the AT1 and AT2 models at 9.52mm (.375) There is a little more interior rim diameter, but still designed by Warren Deck one of the most comfortable rims ever made, featuring just the right amount of width and bite to give the player a sense of comfort and stability.



Vis mer
Produktspesifikasjoner
Fabrikat-ForlagDenis Wick
ProduktTuba
SerieMouthpiece
FinishGullakkert
FargeGull
MaterialeMessing
ArtistAaron Tyndall

Relaterte produkter

Varen er på lager

Skrue til kvartventil stag hendel Conn trombone 88H

58 kr
Varen er på lager

Endestopper gummi Bach Tromboner

15 kr
Varen er på lager

Vannklaffkork Besson Kornett/Althorn

23 kr
Varen er på lager

Vannklaffkork Yamaha Baritone/Euphonium

Vannklaffkork Yamaha Baritone/EuphoniumPr. Stk.
35 kr
Varen er på lager

Vannklaffkork Yamaha Kornett/Trompet

32 kr
Varen er på lager

Ventilstyrer Yamaha Baryton/Euphonium/Tuba

50 kr
Varen er på lager

Slide Stopper for Trumpet Yamaha

The Yamaha trumpet slide stopper is designed to prevent the 1st and 3rd slides from slipping while playing. The silicon rubber material is strong and durable, and won't damage your instrument's finish. In addition, it's springy and elastic, allowing you to use both slides during a performance with the stopper still attached.How to use:Hook the ring on one end of the slide stopper onto the first valve finger hook. Hook the other end onto the third valve hook.The slide stopper can also be used as shown in the other illustrations.Make sure that the ring is hooked on securely to prevent it from coming unhooked.Wash with water when necessary.Cautions when using:Do not expose the product to any heat source, high temperature, or diect sunlight.Keep out of reach of young children.In rare instancesm oil may seep from the slicon rubber. This has no affect on product quality or the instrument.
165 kr 160 kr
Varen er på lager

Ventilfilt Yamaha Kornett/Trompet/Flygelhorn

30 kr

Andre kjøpte også

Varen er på lager

Puter Sax 28,0 mm ITDP

55 kr
Varen er på lager

Mandolinstreng 2A

20 kr
Varen er på lager

Easy Christmas Carols 1 Flute Play-Along

175 kr
Varen er på lager

Sadel Fiolin topp Ibenholt

15 kr
Varen er på lager

Trommestikker Vater Sugar Maple 8A, VSM8AW, Wood Tip

220 kr 198 kr
Varen er på lager

Drei Romanzen Op. 21 - Clara Schumann, Piano

175 kr
Varen er på lager

Suzuki Violin School vol 9 Book

Suzuki Violin School, Volume 9International EditionBy Shinichi SuzukiViolin BookItem: 00-0225DescriptionTeach violin with the popular Suzuki Violin School. The Suzuki Method® of Talent Education is based on Shinichi Suzuki's view that every child is born with ability, and that people are the product of their environment. According to Shinichi Suzuki, a world-renowned violinist and teacher, the greatest joy an adult can know comes from developing a child's potential so he/she can express all that is harmonious and best in human beings. Students are taught using the "mother-tongue" approach. Each series of books for a particular instrument in the Suzuki Method is considered a Suzuki music school, such as the Suzuki Violin School. Suzuki lessons are generally given in a private studio setting with additional group lessons. The student listens to the recordings and works with their Suzuki violin teacher to develop their potential as a musician and as a person. This Suzuki book for Volume 9 is integral for teaching Suzuki Violin lessons.Titles: Concerto in A Major, K. 219 (Allegro aperto, Adagio, Rondo: Tempo di minuetto, Allegro) (Mozart) (Joachim/arr. Suzuki).Additional InformationSeries: Suzuki Violin SchoolAuthor: Shinichi SuzukiInstrument: ViolinFormat: BookPage Count: 48Item Number: 00-0225ISBN 10: 0-87487-225-1ISBN 13: 978-0-87487-225-5UPC: 029156129755
255 kr
Varen er på lager

Sprayflaske Trombone Superslick 2oz/50ml

SuperSlick SB1 2oz. Bottle w/Sprayer CapPocket-sized fine mist sprayer for good water coverage2 oz. bottleComes with sprayer capDesigned, tested, and used by performing musicians 
49 kr
Filters
Sort
display