Søk

Slagverk DW Collector Maple Finishply, 22 Vintage White Marine FP, Chrome Hardware

Drum Kit DW Collector Maple Finishply, 22 White Marine FP, Chrome Hardware
Produsent: DW, Drum Workshop
Tilgjengelighet: På lager
Varenummer: DWKIT-CM-FP22-1
41 445 kr
37 415 kr
decrease increase
Slagverk DW Collector Maple Finishply, 22 Vintage White Marine FP, Chrome Hardware

Størrelser:  
22x14 Bass Drum, VLX+
16x16 Floor Tom w/FLT3 Legs, VLX
12x8 Tom-Tom w/STM, VLT

NB! Tom-Tomnolder evt. tomstativ kjøpes separat


Shells:
Maple Shell, SSC, Specialzied Shell Configuration.


Finish:
Vintage White Marine Finish Ply
Chrome Hardware

Collector Maple VLT Shells:
In experimenting with different exotic woods as alternate shell making materials, DW's Custom Shell Shop discovered that in addition to the different tonal qualities inherent in every unique type of wood, slight alterations in the shell's construction can also greatly influence sound. Some of the woods sampled possessed a vertical grain pattern that when tested, dramatically lowered the pitch of the shell. Thus, VLT (Vertical Low Timbre) was born. For those players who prefer a lower overall tone while still maintaining maximum resonance and attack, VLT can be ordered as an option on all Collector's Series Maple Drums.
VLT consists of arranging the grain pattern of the plies in the shell so the outermost and innermost plies run vertically, and not the traditional horizontal. The vertical grain places less tension on the shell, allowing it to vibrate more freely, resulting in the lowered fundamental pitch.

Thrue Hoop:

To make a better instrument, sometimes you have to go back to the basics. We spent nearly a year-and-a-half designing and perfecting the most consistent counter hoop weve ever produced. Its called the True Hoop and its a major advancement in the relationship between bearing edge, drum head and counter hoop. As drummers, we know how critical that relationship is to tuning and tone. The True Hoop is just that, round and flat, and without the typical variations you often see around stamped holes. It even has an attractive new touch: a fully-rounded outer edge. They now come factory installed on all Custom Shop Drums and are available in all drum hardware color options. True Hoops are also gauged in graduated thicknesses to factory-match various drum sizes.

Drums 8" and 10" in diameter come with 1.6mm True Hoops, while 12"-18" come with 2.3mm. All snare drums come with 3.0mm True Hoops.


STM - Suspension Tom Mount:
DWs patented STM (suspension tom mount) system allows drums to vibrate freely, allowing maximum resonance while securely holding the drum in place. Because there are no washers or grommets inhibiting the lug rod receiver, choking is reduced and tuning is as easy as ever. (U.S. Patent #5520083)

Hardware Colors:
DW Drums are available in five distinct hardware color options; Chrome, Nickel, Gold, Satin Chrome, and Black Nickel. This includes lugs, hoops, STM, and tom legs. Colors other than the standard Chrome will add a 10% cost. Keep in mind, our stands are available in Chrome and 24 Karat Gold.

DW Snare Throw-off Systems:
DW offers 2 styles of snare throw-offs; Traditional Delta ball-bearing throw-off and all new MAG throw-off. A purposefully simple design, the MAG (U.S. Patent No. 7,902,444) is a workhorse drop throw-off with horizontal tension adjustment and smooth, easy-adjust action. It gets its name from a clever magnet that's integrated into the body of the throw-off. When the handle is in the up position, it wont release without a slight tug. When it does release it throws the strainer completely off the head to avoid any strainer buzz. The innovative new 3P, three-position butt plate, allows you to easily and accurately toggle between 3 different levels of strainer tension. The combination of the MAG throw-off and the 3P Butt Plate is the most reliable and adjustable strainer system we've ever built and comes standard on all Custom Shop DW Snares. Both throw-offs are available in all five Custom Shop drum hardware finishes.


Tom Legs:
DW is happy to offer a variety of lengths and metals for floor tom legs to suit your artistic tastes. Our standard Steel 21" and 25" legs as well as our light Aluminum 21" and 27" legs are available in the same colors as our lugs (Chrome, Nickel, Gold, Satin Chrome, and Black Nickel). We also developed the Fine Tune Floor Tom Leg as a convenient and easy way to adjust the resonance of any DW floor tom with leg brackets. Simply adjust the knurled knob above the leg to have less resonance when touching the floor and more resonance when off the floor. It's Chrome plated and made of Steel.


True-Pitch® Tuning Rods:
To give drummers even more control over their sound, DW created its patented True-Pitch® rod system. The rods feature 5mm threads rather than the 12/24 thats standard on most other drums. To compare, there is 1 thread every 0.8mm on our True-Pitch® rods (about 20% more threads), versus 1 thread every 1.05mm on most other drums. The result is a more exacting tuning process. True-Pitch® rods are only available in chrome and gold



Slagverk DW Collector Maple Finishply, 22 Vintage White Marine FP, Chrome Hardware

Størrelser:  
22x14 Bass Drum, VLX+
16x16 Floor Tom w/FLT3 Legs, VLX
12x8 Tom-Tom w/STM, VLT

NB! Tom-Tomnolder evt. tomstativ kjøpes separat


Shells:
Maple Shell, SSC, Specialzied Shell Configuration.


Finish:
Vintage White Marine Finish Ply
Chrome Hardware

Collector Maple VLT Shells:
In experimenting with different exotic woods as alternate shell making materials, DW's Custom Shell Shop discovered that in addition to the different tonal qualities inherent in every unique type of wood, slight alterations in the shell's construction can also greatly influence sound. Some of the woods sampled possessed a vertical grain pattern that when tested, dramatically lowered the pitch of the shell. Thus, VLT (Vertical Low Timbre) was born. For those players who prefer a lower overall tone while still maintaining maximum resonance and attack, VLT can be ordered as an option on all Collector's Series Maple Drums.
VLT consists of arranging the grain pattern of the plies in the shell so the outermost and innermost plies run vertically, and not the traditional horizontal. The vertical grain places less tension on the shell, allowing it to vibrate more freely, resulting in the lowered fundamental pitch.

Thrue Hoop:

To make a better instrument, sometimes you have to go back to the basics. We spent nearly a year-and-a-half designing and perfecting the most consistent counter hoop weve ever produced. Its called the True Hoop and its a major advancement in the relationship between bearing edge, drum head and counter hoop. As drummers, we know how critical that relationship is to tuning and tone. The True Hoop is just that, round and flat, and without the typical variations you often see around stamped holes. It even has an attractive new touch: a fully-rounded outer edge. They now come factory installed on all Custom Shop Drums and are available in all drum hardware color options. True Hoops are also gauged in graduated thicknesses to factory-match various drum sizes.

Drums 8" and 10" in diameter come with 1.6mm True Hoops, while 12"-18" come with 2.3mm. All snare drums come with 3.0mm True Hoops.


STM - Suspension Tom Mount:
DWs patented STM (suspension tom mount) system allows drums to vibrate freely, allowing maximum resonance while securely holding the drum in place. Because there are no washers or grommets inhibiting the lug rod receiver, choking is reduced and tuning is as easy as ever. (U.S. Patent #5520083)

Hardware Colors:
DW Drums are available in five distinct hardware color options; Chrome, Nickel, Gold, Satin Chrome, and Black Nickel. This includes lugs, hoops, STM, and tom legs. Colors other than the standard Chrome will add a 10% cost. Keep in mind, our stands are available in Chrome and 24 Karat Gold.

DW Snare Throw-off Systems:
DW offers 2 styles of snare throw-offs; Traditional Delta ball-bearing throw-off and all new MAG throw-off. A purposefully simple design, the MAG (U.S. Patent No. 7,902,444) is a workhorse drop throw-off with horizontal tension adjustment and smooth, easy-adjust action. It gets its name from a clever magnet that's integrated into the body of the throw-off. When the handle is in the up position, it wont release without a slight tug. When it does release it throws the strainer completely off the head to avoid any strainer buzz. The innovative new 3P, three-position butt plate, allows you to easily and accurately toggle between 3 different levels of strainer tension. The combination of the MAG throw-off and the 3P Butt Plate is the most reliable and adjustable strainer system we've ever built and comes standard on all Custom Shop DW Snares. Both throw-offs are available in all five Custom Shop drum hardware finishes.


Tom Legs:
DW is happy to offer a variety of lengths and metals for floor tom legs to suit your artistic tastes. Our standard Steel 21" and 25" legs as well as our light Aluminum 21" and 27" legs are available in the same colors as our lugs (Chrome, Nickel, Gold, Satin Chrome, and Black Nickel). We also developed the Fine Tune Floor Tom Leg as a convenient and easy way to adjust the resonance of any DW floor tom with leg brackets. Simply adjust the knurled knob above the leg to have less resonance when touching the floor and more resonance when off the floor. It's Chrome plated and made of Steel.


True-Pitch® Tuning Rods:
To give drummers even more control over their sound, DW created its patented True-Pitch® rod system. The rods feature 5mm threads rather than the 12/24 thats standard on most other drums. To compare, there is 1 thread every 0.8mm on our True-Pitch® rods (about 20% more threads), versus 1 thread every 1.05mm on most other drums. The result is a more exacting tuning process. True-Pitch® rods are only available in chrome and gold



Produktspesifikasjoner
Fabrikat-ForlagDW, Drum Workshop
ProduktSlagverk u/Stativer - Shell Packs
SerieDW Collector Maple Series Finishply
Størrelse Omfang22x14-12x8-16x16
Størrelse Bredde22 BD
Antall3 pc
FinishWrap/FinishPly
FargeVintage White Marine Pearl
Farge HwdChrome Hwd
MaterialeMaple
InkludertNon Hardware
InkludertNon Holders
InkludertNon BD Bracket
InkludertTB12 Brackets
InkludertSTM Mount
InkludertTB12 Brackets & FLT3 Legs
Alt. 1True Hoops
Alt. 2Turret Lug
Produktspesifikasjoner
Fabrikat-ForlagDW, Drum Workshop
ProduktSlagverk u/Stativer - Shell Packs
SerieDW Collector Maple Series Finishply
Størrelse Omfang22x14-12x8-16x16
Størrelse Bredde22 BD
Antall3 pc
FinishWrap/FinishPly
FargeVintage White Marine Pearl
Farge HwdChrome Hwd
MaterialeMaple
InkludertNon Hardware
InkludertNon Holders
InkludertNon BD Bracket
InkludertTB12 Brackets
InkludertSTM Mount
InkludertTB12 Brackets & FLT3 Legs
Alt. 1True Hoops
Alt. 2Turret Lug
Filters
Sort
display